xsto CT420S, Руководство по эксплуатации

Страница: 29 / 58

25
Turn on the hand-held controller
switch; Click once to start the
controller screen display; click
again to shut it down.
3.6.2 Initial position
Make sure the goods is fixed
securely, move CT420
S to the edge
of the stairs and make sure the two
tracks lean against the edge of the
first stair. Turn on loading board
automatic adjustment mode on
hand-held controller, set speed 1, go
upstairs by tracks.
3.6.3 At the beginning of going upstairs
CT420S will walk slowly
before it finally gets off the ground.
Under loading board automatic
adjustment mode, the process will
slow down the move. Under the
manual control mode, shift between
“track walk” mode and“loading
board manual adjustment” mode,
make sure the machine going up