xsto CT420S, Руководство по эксплуатации

Страница: 30 / 58

26
slowly, while maintaining the
balance of the loading board.
3.6.4 Going upstairs smoothly
When CT420 S gets off the ground
totally, it can go upstairs smoothly,
then cancel automatic mode and
turn to manual mode.
If CT420 S goes upstairs unstably,
adjust manually the loading board
rotating angle according to
different cargo gravity so that
CT420
S can go upstairs smoothly.
Then you can increase the speed.
3.6.5 Climb the last
THREE
steps
When CT420 S goes up to the edge of the
last stair, turn speed to 1. Turn to loading
board automatic mode by hand-held
controller.
W hen the ma chine is at the one
thirdth position of nylon block,
press the
rear support wheel extends
automatically
button, the rear
support wheel will extend
automatically
, until the rear