Xsens MTi-10 IMU Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 84

background image

Document MT0605P.E

© Xsens Technologies B.V.

MTi User Manual

79

7.6 Warranty and liability

Xsens Technologies B.V. warrants the products manufactured by it to be free from defects in material
and workmanship for a period of 1 year from the date of delivery. Products not subjected to misuse will
be repaired, replaced or credit issued at the sole option of Xsens Technologies B.V. Contact Xsens via

www.xsens.com/support

for return material authorization (RMA) prior to returning any items for

calibration, repair or exchange. The product

must be returned in its original packaging

to prevent

damage during shipping.

The warranty shall not apply to products repaired or altered or removed from the original casing by
others than Xsens Technologies B.V. so as, in Xsens Technologies B.V. opinion, to have adversely
affected the product, products subjected to negligence, accidents or damaged by circumstances
beyond Xsens Technologies B.V.’s control.

NOTE

: Xsens reserves the right to make changes in its products in order to improve design,

performance, or reliability.

Subject to the conditions and limitations on liability stated herein, Xsens warrants that the Product as
so delivered shall materially conform to Xsens’ then current specifications for the Product, for a period
of one year from the date of delivery. ANY LIABILITY OF XSENS WITH RESPECT TO THE SYSTEM
OR THE PERFORMANCE THEREOF UNDER ANY WARRANTY, NEGLIGENCE, STRICT LIABILITY
OR OTHER THEORY WILL BE LIMITED EXCLUSIVELY TO PRODUCT REPAIR, REPLACEMENT
OR, IF REPLACEMENT IS INADEQUATE AS A REMEDY OR, IN XSENS' OPINION IMPRACTICAL,
TO REFUND THE PRICE PAID FOR THE PRODUCT. XSENS DOES NOT WARRANT,
GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE, OR THE RESULTS
OF THE USE, OF THE PRODUCT OR WRITTEN MATERIALS IN TERMS OF CORRECTNESS,
ACCURACY, RELIABILITY, OR OTHERWISE. Xsens shall have no liability for delays or failures
beyond its reasonable control.

7.7 Customer Support

Xsens is glad to help you with any questions you may have about the MTi, or about the use of the
technology for your application. Please

use the FAQ, contact Xsens’ distributor or if you are a direct

customer of Xsens our Customer Support:



Internet and FAQ:

http://www.xsens.com/support



Distributror network:

http://www.xsens.com/en/company-pages/company/distributors



Telephone EMEA/Pacific: +31(0)88-9736700 (+31 88 XSENS 00)



telephone US (Los Angeles, CA): +1 310-481-1800

To be able to help you, please mention your Motion Tracker

Device ID

(on the side of the device) and

software license registration number

in your e-mail.

«
...
81
82
83
84
»

Содержание MTi-10 IMU





















































































Отзывы:

Нет отзывов

Похожие инструкции для MTi-10 IMU

Бренд: ZENEC Страницы: 36

Бренд: ZENEC Страницы: 11

Бренд: Macrom Страницы: 32

Бренд: YF Страницы: 18

Бренд: Navigon Страницы: 125

Бренд: Navibe Страницы: 140

Expert GPS CLOCK 0508

Бренд: Gude Страницы: 33

Бренд: Expresso Satellite Navigation Страницы: 19

Бренд: Javad Страницы: 20

GPS/GSM ALARM & TRACKING SYSTEM

Бренд: Skywatch Страницы: 8

Бренд: Sporty's Страницы: 24

Бренд: KIDDO Страницы: 8

Бренд: ZANIER Страницы: 23

700-00004 Series

Бренд: Avidyne Страницы: 132

Бренд: Kannad Страницы: 20

Бренд: Salind Страницы: 9

Бренд: NAVTELECOM Страницы: 21

RoadMate 5045-MU

Бренд: Magellan Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды