XS Instruments 60 VioLab Series Скачать руководство пользователя страница 11

Страница: 11 / 41

Rev. 1.0 31/01/2020

•

LED

All the instruments are equipped with a two-colours LED (red and green) which provides the user with

important information on the status of the system:

Function

LED

Description

Power on

Fixed

Power off

Fixed

Standby

Flashing

every 20 s

Stable measure

Flashing

every 3 s

Errors during calibration

Flashing

every 1 s

Errors during measurement

Flashing

every 3 s

Time of saving the data

On / Off in rapid succession

Recall Memory mode

Alternate green and red, pause 5 s

Selection confirmation

Switched on for 1 s

Timed screens

Fixed

DHS deactivation

Fixed

Installation

•

Supplied components

The instrument is always supplied with all the accessories necessary for being put into service; the

version without sensor is always supplied with:

Instrument complete with multi-socket adapter, 1m S7 / BNC connection cable, NT55 temperature probe,

buffer solutions in single-dose bottle and / or sachet, electrode holder stand, multilingual user manual and

test report.
There are versions with the sensor(s) already included. Contact your local distributor to be updated on the

correct composition of the sales kit.

•

Start-Up

•

Place the instrument on a flat, stable laboratory table with appropriate front and side accessibility. It is

recommended to place the instrument at not less than 20 cm from overlying and surrounding parts.

Positioning the device in this way, there is no more residual risk of possible minor damage caused by manual

handling of loads.

•

Make sure that the instrument and the surrounding environment are correctly illuminated.

•

Connection of the power supply

•

Check that the electrical standards of the line on which the instrumentation is to be installed comply

with the voltage and operating frequency of the instrument.

•

Use the original power supply only.

•

Connect the power supply plug to the connector on the rear panel of the instrument indicated with the

icon

•

Connect the power supply to an electric socket easy to reach.

Содержание 60 VioLab Series










































Результаты поиска

Содержание 60 VioLab Series

Отзывы:

Бренды по названию

Популярные бренды

XS Instruments 60 VioLab Series, Инструкция по эксплуатации

Результаты поиска

Содержание 60 VioLab Series

Отзывы:

Бренды по названию

Популярные бренды