background image

 

IPC-300 User Manual 

Table of Content 

Table of Content ..................................................................................................2 

1. Introduction .....................................................................................................3 

1. About User Manual ..................................................................................3 

2. Feature.....................................................................................................3 

3. Product and Accessories .........................................................................4 

4. Part Names and Functions ......................................................................5 

5. System Connections ................................................................................6 

2. Installation .......................................................................................................9 

1. Connecting Network(LAN) .......................................................................9 

2. Connecting Audio.....................................................................................9 

3. Connecting Serial Ports ...........................................................................9 

4. Connecting Sensor and Alarm .................................................................9 

5. Connecting Power ...................................................................................9 

6. Check if It Works......................................................................................9 

3. System Operation .........................................................................................10 

1. 

Remote Video Monitoring ..................................................................10 

2. 

Initialization of IP Address.................................................................. 11 

4. Remote Configuration ................................................................................... 11 

1. Using Internet Explorer .......................................................................... 11 

2. IPC Configuration ..................................................................................13 

2.1 System Configuration ...................................................................13 

2.2 Video Configuration ......................................................................15 

2.3 Audio Configuration ......................................................................18 

2.4 Network Configuration ..................................................................20 

2.5 Serial Port Configuration ..............................................................22 

2.6 Event Configuration ......................................................................23 

2.7 Preset Configuration.....................................................................25 

2.8 User Configuration........................................................................27 

2.9 Camera Configuration ..................................................................29 

 

 

 

-2-

Содержание IPC-300































Отзывы: