IPC-300 User Manual
On Disconnect
Configure the actions when the link (connection) with peer system is
disconnected. Multiple actions can be set for a single event.
Alarm activation duration
Set the duration of alarm activation in case of an event. If it is set to continuous,
it will be in active state until an operator reset it manually.
E-mail Notification
Specify the information to send E-mail as the action of an event. The address of
mail(SMTP) server needs to be specified on
Server Address
field. When the
server requires authentication, ID and password of an E-mail account need to
be entered also. Destination address needs to be entered on
Destination
Address
field. More than one address can be entered by delimiting comma(,)
or semi-colon(;). Destination address can take up to 63 characters. Video clip of
AVI file format at the moment of the event can be attached by setting
Video
Clip Attaching
.
FTP Upload
Specify the information for uploading video file as the action of an event. The
address of an FTP server to receive video files is specified on
Server Address
field, and
Port
specifies the port for FTP operation (Port 21 is the default port in
FTP operation. If different port is configured in the FTP server, this port needs
to be changed accordingly.). ID and password for accessing the FTP server
also need to be specified.
Event Recording
Specify how a video clip is to be generated for E-mail sending or FTP uploading.
Pre-event Time
specifies the duration of recording before an event happens.
Post-event Time
specifies the duration after the event is cleared.
2.7
Preset Configuration
-25-
