Battery replacing procedure
To replace battery you will need a small Philips head screwdriver to open maintenance door on
the left side of the clock. Here are steps to open maintenance door:
1 Unplug your Xronos Clock.
2 Looking at the front of the clock maintenance door is on the left of the clock (opposite
from speaker side) held by 3 small screws (as shown on the picture above)
3 Gently remove screw that holds door from the back of the clock (1).
4 Unscrew two screws (2,3) on the bottom of the maintenance door. These are a little
shorter than the screw you removed from the back. Try not to mix them.
5 Door shoul
d now come off easily, it’s only held by the tab on the bottom.
