Xray XLL Link, Инструкция по эксплуатации

Страница: 7 / 32

7
4. 5. 6.
The flat of the nut must be PARAllEl to the lower arm.
VERY IMPORTANT
1. Mount the assembled left and right suspension
to chassis by installing the bottom mounting screws
in the order shown. Tighten the mounting screws
VERY GENTLY, and do not overtighten the screws.
2. Fully tighten the screws in exactly the same
order as you installed them.
The front suspension is
manufactured from composite
material which may slightly
move or bend when the
mounting screws are tightened.
As such it is extremely important
to follow these steps to ensure
tweak-free mounting.
Marked “R“
Marked “L“
ASSEMBLED VIEW
NOTE
ORIENTATION
NOTE
ORIENTATION
The number of shims used
affects the ride height of the
car, so determine the proper
amount of shimming based
on your tire diameter.
Moves freely
The number of shims used affects the ride
height of the car, so determine the proper
amount of shimming based on your tire
diameter.
For initial setting use 3.1x8x0.5 shims (3x)
2x 2x 2x
FRONt RidE hEiGht AdjuStmENt
iNitiAl SEttiNG
above upper arm (0.5mm)
above steering block (1.3mm)
beneath steering block (0.2mm)
ASSEMBLED VIEW
FRONt COil SPRiNGS
#372180 C=3.5 - GOLD
#372181 C=4.0 - SILVER
#372182 C=5.0 - BLACK
#372183 C=6.0 - GREY
0.5mm
0.5mm
0.2mm
0.2mm (4x)
RIDE HEIGHT RIDE HEIGHT
960031
ALU N M3
372290
S 3.2x4.8x0.5
964032
S 3.2x4.8x0.2
372291
S 3.1x8x0.5
965019
C 1.9
903312
SFH M3x12
960031
ALU N M3