Xray XLL Link, Инструкция по эксплуатации

Страница: 22 / 32

22
4. 5.
Extend the shock shaft
completly to release the
air trapped beneath the
shock piston. Fill the shock
shaft body with the shock
oil but not fully approx.
3mm from the top of the
shock body.
1) Install the 5x1 o-ring
onto shock shim.
2) Place the shock shim
with the o-ring into the
shock body.
3) Install the 2x2 o-ring
into the shock cap.
4) Install the shock cap.
1) Slowly move the shock
shaft up so the shock
oil will flow under the
shock piston.
2) Extend the shock shaft.
Extend the shock shaft
completly. Fill the shock
shaft body with the shock
oil but only 1/3.
1/3
approx.
3mm
from top
Screw fully the shock cap in
the filled shock body. Excess
oil will spill from the shock.
Tighten completly.
Oil 350cSt
Oil 350cSt
971022
O 2x2
970050
O 5x1
901303
SB M3x3