background image

 

 

Operational Instructions and Training Guidelines 
To ensure optimal performance and compliance with the occupational/controlled environment RF energy 
exposure limits in the above standards and guidelines, users should transmit no more than 50% of the time 
and always adhere to the following procedures; 

In front of the face, hold the radio in a vertical position with microphone (and other parts of the radio 
including the antenna) at least 100cm away from the nose or lips. Keep the radio at a proper distance is 
important to ensure compliance. 
Note: RF exposure decrease with increasing distance from the antenna. 

Body Worn Operation; when worn the body, always place the radio in an approved clip, holder, or body 
harness for this product. 
Using approved body-worn accessories is important because the use of non-approved accessories may 
results in exposure levels, which exceed the occupational/controlled environment RF exposure limits 

Using only approved supplied or replacement antennas, batteries, and audio accessories, use of non-
approved antennas, batteries, and wired or wireless accessories may exceed the applicable RF exposure 
guidelines (IEEE, ICNIRP or ISED). 
 

Instructions opé rationnelles et directives de formation 
Pour garantir des performances optimales et le respect des limites d'exposition aux é nergies RF dé finies 
dans les normes et directives susmentionné es, les utilisateurs ne doivent pas transmettre plus de 50% du 
temps et se conformer systé matiquement aux procé dures suivantes.En face du visage, tenez la radio en 

position verticale avec le microphone (et les autres é lé ments de la radio, y compris l’antenne) à au moins 
100 cm du nez ou des lè vres. Maintenir la radio à  une distance approprié e est important pour assurer la 
conformité .Remarque: l'exposition aux RF diminue avec l'augmentation de la distance par rapport à  
l'antenne.Opé ration porté e sur le corps; Lorsque vous portez la carrosserie, placez toujours la radio dans un 
clip, un support ou un harnais approuv

é

 pour ce produit.L'utilisation d'accessoires approuvé s pour le port du 

corps est importante car l'utilisation d'accessoires non approuvé s peut entraîner des niveaux d'exposition 
supé rieurs aux limites d'exposition RF des environnements professionnels / contrô lé s.Si vous utilisez 

uniquement des antennes, des batteries et des accessoires audio approuvé s ou de remplacement fournis, 
l'utilisation d'antennes, de batteries et d'accessoires câ blé s ou sans fil non approuvé s peut dé passer les 
consignes d'exposition RF applicables (IEEE, ICNIRP ou ISED).Instructions opé rationnelles et directives de 
formation 

Содержание DM-4000 Series




























Отзывы: