RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use
Notice: this radio is intended for use in occupational/controlled conditions where users have full knowledge
of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and
International standards. This radio device is NOT authorized for general population consumer use.
Federal Communication Commission (FCC) Regulations
When Digital 50W vehicle Radio is used as a consequence of employment, the FCC requires users to be
fully aware of and able to control their exposure to meet occupational requirement. Exposure awareness can
be facilitated by the use of a product label directing users to specific user awareness information. Your
Digital 50W vehicle Radio has a RF Exposure Product Label. Also, your Digital 50W vehicle Radio Radio
user manual includes information and operating instructions required to control your RF exposure and
satisfy compliance requirements.
Compliance with RF Exposure Standards
Your Digital 50W vehicle Radio is designed and tested to compliance with a number of national and
international standards and guidelines for human exposure to radio frequency electromagnetic energy. This
radio compliance with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure
environments at operating duty factors of up to 50% talk – 50% listen and is approved for occupational use
only. In terms of measuring RF energy for compliance with these exposure guidelines, your radio generates
measureable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in
standby mode.
Your Digital 50W vehicle Radio complies with the following RF energy exposure standards and guidelines:
●
United States Federal Communications Commission (FCC), Code of Federal Regulations;
●
Institute of Electrical and Electronic Engineers (IEEE) C95.1
●
International Commission on Non-lionizing Radiation Protection (ICNIRP)
RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations
To control your exposure and ensure compliance with the occupational/controlled environment exposure
limits, always adhere to the following procedures;
●
DO NOT remove the RF Exposure Label from the device
●
User awareness instructions should accompany device when transferred to other users.
Operational Instructions and Training Guidelines
