https://www.XPOtool.com
Item 61955
Page 14
The Tool Experts
05 2022-1
require pulling the starter handle several times, depending on how heavily the device is stalled. If the
device still does not start, refer to the troubleshooting section.
Maintenance
Warning!
•
Never touch the exhaust system unless the engine and exhaust are cold. Touching a hot ex-
haust can result in serious burns.
•
The spark plug must be removed before maintenance work. This is not necessary for carburettor
adjustments.
Checking for loose fastenings and parts
•
Exhaust
•
Spark plug gasket
•
Air filter
•
Housing screws
Checking for damaged or worn parts
Contact an authorised service dealer for replacement of damaged and/or worn parts.
•
Fuel tank: Never operate the device with a damaged or leaking fuel tank
•
Collection bag: Never operate the device with a damaged or torn collection bag.
Check and clean the device and labels
•
Check the device for loose or damaged parts after each use. Clean the device and badges with
a damp cloth and mild detergent.
•
Dry the device with a clean, dry cloth.
Cleaning the air filter
№
Name
№
Name
1
Air filter
2
Air filter cover
A dirty air filter will affect performance of the engine and increase fuel consumption and emissions.
Clean the air filter after every 5
hours of operation.
1.
Clean the cover and areas around it to prevent debris from entering the carburettor when you
remove the cover.
Note:
Before opening the air filter cover, move the choke lever to the “run” position.