XV0500 Video MCU User's Guide
Page 9 of 30
Xorcom Ltd.
● P.O. Box 60, Misgav Industrial Park 20174 ● Tel: +972 4 995-1999 ●
www.xorcom.com
If the 172.16.200.nnn addresses are already in use on the LAN then it is necessary to change the IP addresses
of the MCU-DSP and of the eth1 interface in order to avoid conflict of IP addresses. Please refer to
Appendix
A: How to change MCU-DSP IP Settings
for further details.
The MCU IP settings can be changed via the Web-based management interface. Please refer to the
Network
Settings
section below.
If the MCU IP address is unknown and it is not possible to connect to the device’s Web-based management
interface then a keyboard and a display monitor can be used to obtain and/or change the eth0 or/and eth1 IP
settings. Refer to
Appendix C: How to obtain/configure IP address by using a keyboard and a display monitor
.
Configuring the MCU-CS IP Settings
The MCU-CS automatically uses the XV0500 IP settings. If the XV0500 IP addresses and/or the MCU-DSP
address have been changed, then it will be necessary to reboot the server in order for the MCU-CS to use the
new settings.
MCU Administration and Configuration
Overview
The administration and the configuration of MCU is done through the GUI of the Web-based management
system.
Login
Access the following URL to reach the MCU management screens:
http://<XV0500 IP address>/mcu
The default username/password is admin/admin.
Main Menu
Once the user has logged in the main menu is displayed. The main menu is divided into two major
categories:
a)
System Setting
b)
Conferences
