XV0500 Video MCU User's Guide
Page 12 of 30
Xorcom Ltd.
● P.O. Box 60, Misgav Industrial Park 20174 ● Tel: +972 4 995-1999 ●
www.xorcom.com
SIP Interface
Parameter
Values
Description
Listening SIP Port
Port
This parameter provides an additional SIP port for SIP interactions between
XV0500 and external entities. The external entities can be SIP UAs like SIP-
PBXs, or non-registered SIP clients.
SIP clients cannot register to MCU-CS through this port, to register with
XV0500 the Listening SIP Port of the Built-in Registrar / Proxy should be used.
Block Direct Calls
Check-box
(Yes/No)
If this box is checked, direct incoming calls through “SIP Listening Port” (see
above), will be blocked.
Built-in Registrar / Proxy
Parameter
Values
Description
Enable Registrar /
Proxy
Check-box
(Yes/No)
If this box is checked then XV0500 can be used as a registrar for SIP clients.
Listening SIP Port
Port
This is XV0500’s built-in listening SIP port, used for registration of SIP clients
and session establishments. It is applicable only if “Enable Registrar / Proxy”
(above) check-box has been set.
REGISTER Authenti-
cate Required
Check-box
(Yes/No)
“REGISTER Authenticate Required” is a checkbox that determines the au-
thentication of the managed users in theXV0500. Managed users are users
that are provisioned in the system. If the box is checked, non-managed users
are
not
allowed to register with the system.
Authentication Realm
String
Authentication realm of XV0500 built-in Registrar for REGSITER digest chal-
lenge, any string can be used.
SIP Users
Add Users
Used to add new users to the system. This function is applicable only when
“Enable Registrar Proxy” and “REGISTER Authenticate Required” check-boxes
have been checked. For more details, please refer to “
AddUsers
” below.
Show Users
Used to display the system’s users. This function is applicable only when
“Enable Registrar / Proxy” check-box has been set.
For more details, please refer to “
Show Users
” below.
NAT Traversal
MCU is behind NAT
Check-box
(Yes/No)
States whether or not the MCU is behind a NAT.
MCU Public IP / Do-
main Name
IP address
SIP public IP address or domain name, used for near-end NAT traversal. NAT
Traversal is not applicable for sessions created directly to the MCU-CS SIP
interface (not via the built-in SIP proxy.)
External Registrar
Parameter
Values
Description
Use External
Registrar
Check-box
(Yes/No)
If an external registrar is configured, MCU registers access numbers and
conference rooms to the external registrar (which can be your IP-PBX).
