Xorcom GW0017, Руководство пользователя

Страница: 48 / 88

GW0017 User Manual
43
IP-to-IP Call
If this parameter is enabled, user can dial IP address through a
phone to call destination gateway.
Only Accept Call from ACL
(SIP server or IP Trunk)
If this parameter is enabled, the device only accepts incoming
call from SIP server only. Default value is ‘not enable’.
Anonymous Call
If this parameter is enabled, ‘anonymous’ will be included in
SIP message.
Reject Anonymous Call
If this parameter is enabled, all anonymous calls will be
rejected. Default value is ‘not disable’.
# as ending Dial Key
If this parameter is enabled, ‘#’ is used as the end mark for
dialing.
# Escape
If this parameter is enabled, ‘#’ is considered as a digit of the
number that is dialed.
Send ‘#’ when First Dial
Number is ‘*’ If this parameter is enabled, ‘#’ will be sent when first dialed
digit is ‘*’.
Voicemail instructions:
Here takes the GW0017-128S device together with Elastix as the example to introduce how
voicemail works in the device.
(1) After the device registers to Elastix server, enable the voicemail function in Elastix for
the corresponding extension number and then set password. As below
：