Xorcom GW0017 Скачать руководство пользователя страница 26

Страница: 26 / 88

GW0017 User Manual

IP Address

There are three kinds of IP address for the WAN port and LAN port:

DHCP: Obtain IP address automatically

GW0017 is regarded as a

DHCP client, which sends a broadcast request and looks for a DHCP

server from the LAN to answer. Then the first discovered DHCP server

automatically assigns an IP address to the GW0017 from a defined range

of numbers.

Static IP Address:

Static IP address is a semi-permanent IP address and

remains associated with a single computer over an extended period of

time. This differs from a

dynamic IP address,

which is assigned

hoc

at the start of each session, normally changing from one session to

the next.

If you choose static IP address, you need to fill in the following

information:

⚫

IP Address: the IP address of the WAN port of the GW0017;

⚫

Subnet Mask: the netmask of the router connected the GW0017;

⚫

Default Gateway: the IP address of the router connected the GW0017;

PPPoE:

PPPoE is an acronym for point-to-point protocol over Ethernet,

which relies on two widely accepted standards: PPP and Ethernet. PPPoE

is a specification for connecting the users on an Ethernet to the Internet

through a common broadband medium, such as a single DSL line,

wireless device or cable modem. PPPOE IP address refers to IP address

assigned through the PPPoE mode.

If you choose PPPoE, you need to fill in to fill in the following

information:

⚫

Username: the account name of PPPoE

⚫

Password: the password of PPPoE

⚫

Server Name: the name of the server where PPPoE is placed

DNS Server

IP addresses of primary DNS server and standby DNS server are displayed.

Cloud Register

Status

Whether the GW0017 device is registered to cloud or not.

System Uptime

The running time of the GW0017 device since it is powered on.

NTP Status

Succeed: the GW0017 device is sync to NTP server successfully;

Failed: the GW0017 device fails to be sync to NTP server. Then you

should check network connection and the NTP server.

WAN Traffic

Statistics

Total bytes of message received and sent by WAN port.

Usage of Flash

Detailed usage of Flash memory

Usage of RAM in

Linux

detailed RAM usage of Linux core

Usage of RAM in

Detailed RAM usage of AOS

Содержание GW0017

























































































Результаты поиска

Содержание GW0017

Отзывы:

Xorcom GW0017, Руководство пользователя, Страница: 26 / 88

Результаты поиска

Содержание GW0017

Отзывы: