XONTEL XT-800FXO Скачать руководство пользователя страница 7

Страница: 7 / 65

Web Configuration Panel

There are 4 main sections on the Web Configuration Panel for users to check the
XT-800FXO Gateway status and configure it.

Status:

check System Status, Port Status, Trunk Status, Network Status and

check call logs, system logs.

System:

configure Network Settings, Security related Settings, System Date and

Time, Password, Backup and Restore, etc.

Gateway:

configure FXO ports, gateway settings and SIP settings, etc.

Logout:

log out XT-800FXO.

Note:

After saving the changes, remember to click the “Apply changes” button on the upper
right corner of the Web GUI to make the changes take effect.

Application Description

Connect IP PBX and XonTel XT-800FXO Gateway

XonTel XT-800FXO gateway is a solution to extend FXO ports for your PBX.

Two modes are available for you to connect PBX and XonTel XT-800FXO gateway, we

call them VoIP mode and SPS (Service Provider SIP)/SPX (Service Provider IAX)

mode. Three modes are available for you to connect your SIP server and XT-800FXO

Gateway. We call them SIP Account Mode, VoIP Mode and SPS (Service Provider

SIP) Mode. You can choose any one of the 3 modes to connect your SIP server and

XT-800FXO Gateway. SPS Mode is recommended.

Account Mode:

Create one SIP account on XT-800FXO Gateway, and take the SIP account to

server are connected by the account.



Calls from SIP to PSTN

1) Create one outbound route on your SIP sever, and select the SIP trunk you

have registered just now.

2) Config

ure a “IP->Port” route on XT-800FXO Gateway, choose the SIP

account in the field “Call Source”, and choose a PSTN trunk or PSTN trunk
group in the field “Call Destination”.

3) Make a call from your SIP Server and the call should match the outbound

Содержание XT-800FXO


































































Результаты поиска

Содержание XT-800FXO

Отзывы:

Похожие инструкции для XT-800FXO

Бренды по названию

Популярные бренды

XONTEL XT-800FXO, Руководство пользователя

Результаты поиска

Содержание XT-800FXO

Отзывы:

Похожие инструкции для XT-800FXO

Бренды по названию

Популярные бренды