XONTEL XT-800FXO, Руководство пользователя

Страница: 55 / 65

55
E-mail Address
The E-mail Address that XT-800FXO Gateway will use to send system alert or
balance alarm.
Password
The password for the email address used above.
SMTP Server
The hostname of an SMTP server that XT-800FXO Gateway will connect in order to
send system alarm or balance alarm via email, i.e. mail.yourcompany.com.
Port
SMTP Port: the default value is 25.
Use SSL/TLS to send secure message to server
If the server of sending email needs to authenticate the sender, you need to select the
check box.
Note :
This option must be selected for Gmail or exchange server. After filling out the above
information, you
can click on the ‘Test Account Settings’ button to check whether
the setup is OK.
1) If the test is successful, you can use the email safely.
2) If test failed, please check the above information is correct or network is proper.
Auto Provision Settings
Three methods are supported for Auto Provision: PNP, DHCP and
you can manually configure a server URL to get the configuration
file from the server. Go to
System→System Preferences→Auto
Provision Settings to configure.
Figure 11-4 Auto Provision Methods
PNP and DHCP modes work along with PBX. Firstly, users need to
configure XT- 800FXO on PBX. Then XT-800FXO will find and get
the configuration file from PBX during boots up.
In PNP mode, you just need to place the XT-800FXO in the same
IP range network with PBX, then you can find the XT-800FXO and
provision it on PBX.
If you use DHCP mode to do auto provision, you should enable
DHCP Server on PBX to make it as a DHCP server.
Then select DHCP mode on LAN settings page to make XT-800FXO Gateway as a
DHCP client.