XONTEL XT-800FXO, Руководство пользователя

Страница: 47 / 65

47
Recipient’s
Name
The recipients for the alert notification, and multiple email
addresses are allowed, please separate them by “;”.
E.g. b.mansour@xontel.com;Ali@xontel.com
Subject The subject of the alert email.
Email Content
Text content supports predefined variables. Variable names
and corresponding instructions are as follows:
gateway hostname:$(HOSTNAME)
attack source ip address:$(SOURCEIP)
attack dest mac:$(DESTMAC)
attack source port:$(DESTPORT)
attack source protocol:$(PROTOCOL)
attack occurred:$(DATETIME)
Important Note:
To use alert settings with email notification please configure Email Settings in XT-800FXO Gateway
AMI Settings
The Asterisk Manager Interface (AMI) is a system monitoring and management
interface provided by Asterisk. It allows live monitoring of events that occur in the
system, as well enabling you to request that Asterisk perform some action. The
actions that are available are wide-ranging and include things such as returning status
information and originating new calls.
There are two main types of messages on the Asterisk Manager Interface: manager
events and manager actions.
The 3
rd
party software can work with XT-800FXO Gateway using AMI interface. It is
disabled by default. If necessary, you can enable it.
Figure 10-5 AMI Settings
User Name, Password & Port
After enabling AMI, you can use this username and password to log in XT-
800FXO Gateway. The default port is 5038.