XONTEL S2400 Скачать руководство пользователя страница 10

Страница: 10 / 104

S2400 User Manual

Humidity

10% to 90% (non-condensing)

Placement Instructions

To avoid unexpected accident, personal injury or device damage, please read the

following instructions before installing the Gateway.

1. Ambient Temperature: to avoid overheating, please do not run S2400 in the

place where the ambient temperature is above 104°F (40°C).

2. Ventilation: please make sure that the device has good ventilation around.

3. Anti-jamming: there may be some sources of interference that might affect the

normal running of the Gateway.

It’s highly recommended that the device



Should be placed away from high-power radio, radar transmitters and high

frequency, and high-current devices.



Is using independent power junction box and effective anti-grid interference
measures have been taken.

4. Mechanical load: Please make sure that the device is placed steadily to avoid any

accident that might cause damage. If placed on the desktop, please ensure it is

horizontally placed.

Connect Your S2400

Connection of Ethernet Ports

S2400 provides one 10/100M adaptive RJ45 Ethernet LAN port.

Connect one end of a network cable to the LAN port of the S2400, and the other end

to any port of

company’s LAN switch/router.

Connection of FXO Ports

S2400 supports 8 FXO ports.

Connect the FXO interfaces to the Public TelephoneNetwork (PSTN).

Power Connection

Connect the power cable to

the S2400’s powerport, and then plug the power socket

into an electrical outlet.Press the On switch to power on the S2400. The device will

start booting. In the meantime, users would see that the

―POWER‖ and ―RUN‖

indicator lights turn on.

Содержание S2400









































































































Результаты поиска

Содержание S2400

Отзывы:

Похожие инструкции для S2400

Бренды по названию

Популярные бренды

XONTEL S2400, Руководство пользователя

Результаты поиска

Содержание S2400

Отзывы:

Похожие инструкции для S2400

Бренды по названию

Популярные бренды