XOBD2 V-30, Руководства пользователя

Страница: 29 / 35

U
U
s
s
e
e
r
r
M
M
a
a
n
n
u
u
a
a
l
l
① ① ① ①
[01-Interrogate control unit versions]
Click on [01-Interrogate control unit versions] to
see the information of control unit as shown on the
left.
Note: Read out old ECU codes with this
function when performing ECU coding.
[02
② ② ② ②
-Interrogate fault memory]
To display the DTC saved in the current control unit,
click [02-Interrogate fault memory] . Please refer
to the left image.
③ ③ ③ ③
[03-Final control diagnosis]
Click on the button [03-Final control diagnosis] to
test relevant actuator automatically as shown on
the left image. Click on [Active Test] to begin
actuator test.
④
④ ④
④
[04-Introduction of basis setting]
Click on the button [04-Introduction of basis
setting] for basic setting. Input desired number
using the number keys and click on the button [OK]
to start the basic setting.
[Del] : Delete the input numbers;
[Left] : Move cursor to left;
[Right] : Move cursor to right;
[Home] : Move cursor to Home;
[End] : Move cursor to End;
[Enter] : confirm enters.