U
U
s
s
e
e
r
r
M
M
a
a
n
n
u
u
a
a
l
l
Fig.2-9 Software installation screen
Fig.2-10 software installation screen
2.3.3.6 Update
(1) Take out the SD card from V30 main unit;
(2) Put the SD card into SD Card reader;
(3) Connect the Card-Reader to PC USB port;
(4) Select the SD card driver on the top-right
side of software installation screen as shown in
Fig.2-9;
(5) Click on the button
[Update]
, the selected
programs already downloaded to your PC hard
drive will be installed on SD card automatically.
Note: Make sure the update destination is
the SD card driver. To confirm this, please
enter “My computer” on the PC to verify the
content in SD card.
2.3.3.7 Software Management
You can delete old versions of software on the
SD card by software management.
Operation instruction:
Click on the button
[Management]
to enter the
screen shown in Fig. 2-10. Select the software
that is not needed and click on
[Delete].
The
selected software will be uninstalled
automatically.
2.3.3.8 Exit
After finishing all of the steps, click on
[Exit]
to
exit the update client.