xMount@Safety instructions
External power supply
For power supply of the product, you are allowed to exclusively use the defined accumula-
tor and the supplied adapter. You will find further information about this in the operating
instructions of the product. Please only use adapters and accumulators released for your
product. When connecting and disconnecting the cables please observe the information
in the operating instructions of the product. Adapters used in vehicles may be exclusively
operated under the supervision of adults. If the product is switched on, please do not keep it
in an environment with a poor air circulation. Otherwise, this may particularly cause damages
to the product or even fire. Please do not keep charging devices, adapters, accumulators and
batteries near a source of heat. Excessive heat may cause the charging device and adapter
catching fire. Please disconnect them from the power supply if not supervised by adults.
Please make sure the contacts of your power socket are clean. Adapters may get very hot.
Never hide the ventilation slots of the adapter. Do not use damaged cables, otherwise there
is the risk of an electric shock or fire.
Positioning and operation
Mount the product to such an extent that it cannot cause any injury neither in the range of
an airbag nor in the event of an accident, particularly not in the impact area of the head or
body. Usually, the products are designed for being mounted at the screen, at the air grid or at
the headrests. For products with electrical supply please pay attention to the following:
Lay the cables in a manner that they do not cause any danger (risk of stumbling) and are not
damaged. When connecting the cables please pay attention to the corresponding informa-
tion in the operating instructions of the product. The assembly of the product and also the
assembly of accessory parts must by no means impede the driver during driving the vehicle.
Do not operate, mount or adjust this or other products during driving. During driving, please
to not reach for or look for objects that have fallen down.
Anti-theft system
The xMount anti-theft system is construed for simple theft (removal). It cannot withstand
theft attempts by tools and brute force. For the anti-theft protection, please exclusively use
locks of the brand Burgwächter C-Line 220-20 with a diameter of 11 mm in order to avoid the
mount sliding on. Moreover, the device comes with an additional cover that is required to be
used.
Attention
No liability is assumed for damages resulting from misuse of the product or non-observance
of the safety instructions.
Benjamin Hermann Handels UG
Mühlweg 12 c . 61169 Friedberg
+49 (0) 6 031 - 67 28 106
[email protected]
Contact:
www.xmount.de
