xMount@Wall Secure
Remove the holder from the packaging.
xMount Wall Secure is already pre-assembled by the
factory.
For fastening, please screw xMount Wall Secure tightly
in place at a suitable surface.
For adjusting the ball joint according to your request
•
remove the centred cover of the holder.
•
remove the M 4 cap nuts on the back side.
•
remove all cross-head screws.
•
remove the holder with parts 2 and 3 now.
•
remove the locking plate by switching it.
•
Underneath, you will find the adjusting screw.
•
During assembly, please pay attention to the opti-
mal choice of the screws.
•
Screw M 4x20 screws in the threads top right and
bottom left, M 4x10 screws top left and bottom
right.
•
Screw the cap nuts in place on the back side of the
holder now.
•
Now push the iPad into the holder with the home
button downwards.
•
Verschliessen Sie diesen nun mit Teil 1 und einem
qualifizierten Schloss.
