Benjamin Hermann Handels UG
Mühlweg 12 c . 61169 Friedberg
+49 (0) 6 031 - 67 28 106
[email protected]
Contact:
www.xmount.de
xMount@Safety instructions
External power supply
For power supply of the product, you are allowed to exclusively use the defined accumulator
and the supplied adapter. You will find further information about this in the operating instruc-
tions of the product. Please only use adapters and accumulators released for your product.
When connecting and disconnecting the cables please observe the information in the operating
instructions of the product. Adapters used in vehicles may be exclusively operated under the
supervision of adults. If the product is switched on, please do not keep it in an environment with
a poor air circulation. Otherwise, this may particularly cause damages to the product or even fire.
Please do not keep charging devices, adapters, accumulators and batteries near a source of heat.
Excessive heat may cause the charging device and adapter catching fire. Please disconnect them
from the power supply if not supervised by adults. Please make sure the contacts of your power
socket are clean. Adapters may get very hot. Never hide the ventilation slots of the adapter. Do
not use damaged cables, otherwise there is the risk of an electric shock or fire.
Positioning and operation
Mount the product to such an extent that it cannot cause any injury neither in the range of an
airbag nor in the event of an accident, particularly not in the impact area of the head or body.
Usually, the products are designed for being mounted at the screen, at the air grid or at the
headrests. For products with electrical supply please pay attention to the following:
Lay the cables in a manner that they do not cause any danger (risk of stumbling) and are not
damaged. When connecting the cables please pay attention to the corresponding information in
the operating instructions of the product. The assembly of the product and also the assembly of
accessory parts must by no means impede the driver during driving the vehicle. Do not operate,
mount or adjust this or other products during driving. During driving, please to not reach for or
look for objects that have fallen down.
Anti-theft system
The xMount anti-theft system is construed for simple theft (removal). It cannot withstand theft
attempts by tools and brute force. For the anti-theft protection, please exclusively use locks of
the brand Burgwächter C-Line 220-20 with a diameter of 11 mm in order to avoid the mount
sliding on. Moreover, the device comes with an additional cover that is required to be used.
Attention
No liability is assumed for damages resulting from misuse of the product or non-observance of
the safety instructions.