22
22. Device maintenance
•
To prevent contamination, liquid scaling, and metal corrosion, please
change all liquid in the cooling loop on a regular basis, at least once
every 3 months.
•
Avoid accumulation of dust on the quick release connector, the refill
port, the rubber seals and around the water ports of your laptop.
Clean all connections on a regular basis with the bulb pump, brush,
and microfiber cloth.
•
Only use coolant liquids that are certified for use in PC liquid cooling.
Do NOT use liquids with color additives. Do NOT mix different types
of coolant liquid. Do NOT use tap water or any other food product.
Mixing certified coolant liquid with industry-grade distilled water is
allowed.
23. Reminders
•
Please read the user manual in full before operating the device.
•
Please check all ports for leakage before powering up the device.
•
Do not power on the device if there is no liquid inside the device.
•
If the tubes are connected to the laptop but water is not flowing (i.e.
if OASIS is not operating), the connector may accumulate heat in the
metal part because of the temperature generated by the system.
•
Turn XMG OASIS off, before you unplug the tubes from your laptop.
•
Do NOT use the drainage adapter as a bridge between laptop and the
tubes of XMG OASIS.
•
Keep the device away from children, pets or unauthorized 3rd parties.
•
Before exposing XMG OASIS to environmental temperatures below
5
°C (41
°F) and before
any transportation or shipping
,
drain all liquid
from the main unit, the cooling loop, and the laptop.
•
Any changes or modifications not expressly approved by the party
responsible for compliance may void the user's authority to operate
this device and may invalidate your warranty.
•
The use of
unauthorized cables, tubes
, flow meters, air pressure
devices and similar accessories in the cooling loop may invalidate
your warranty.