62
63
Using your Xpress
RC
i
Auto Tune
The Auto Tune feature allows you to tune to a channel when scrolling through
the channel list, without having to press the
Select button
. When a channel is
highlighted in the channel list, after 3 seconds the radio automatically tunes to
that channel . The Auto Tune feature is off by default .
To turn Auto Tune on (or off):
1.
Press
menu
.
2.
Scroll down to highlight
Channel Access
and press the
Select button
.
3.
Press the
Select button
to select
Auto Tune
which will change to
yellow .
4.
Turn the
Control knob
clockwise until
On
is displayed (or counter-
clockwise until
Off
is displayed) and press the
Select button
.
Jump
Press
jump
to listen to the last channel you were listening to .
TIP!
You can view what’s playing on both the current channel and the previous
channel at the same time . Refer to “Changing the Display Mode” on page 55 .
Favourite Channels
You can set up to 10 of your favourite channels so you can easily access
them . Each favourite channel can be assigned to a number button .
To assign a favourite channel to a number button:
1.
Tune to the desired channel .
2.
Be sure you are in Favourite
Channels mode . Press
fav
until “Favourite Channels”
appears at the top of the
display screen .
3.
Press and hold the number
button
0
-
9
you want to assign
to that favourite channel .
To listen to a favourite channel:
1.
Be sure you are in Favourite
Channels mode . Press
fav
until “Favourite Channels”
appears at the top of the
display screen .
2.
Press the number button
0
-
9
that was assigned to the
desired favourite channel .
TIP!
To see your list of favourite channels when in the Favourite Channels
mode, press display . Scroll to highlight a favourite and press the
Select
button
to listen to that channel .
Содержание Xpress RCi
