44
45
Option 3:
Power
Connect Installation Instructions
1
Insert the dock into the
mount .
2
Insert your Xpress
RC
i
into
the dock .
3
Power on your Xpress
RC
i
by pressing the
Power
button
.
4
Be sure the vehicle is outside and the antenna
has a clear view of the sky . Verify that you are
receiving the XM signal . There should at least
be one bar on the top left corner of the main
display screen that denotes antenna signal
strength . You can also press
menu
and then
turn the Control knob to scroll to and highlight
Signal Indicator
. Press the
Select button
. The Satellite
and Terrestrial bars show the
strength of the signal being
received . If the signal reception
is good, press and hold
menu
to return to the main display
screen . You are ready to make
the audio connection .
Signal Indicator
SATELLITE
TERRESTRIAL
display screen that denotes antenna
signal strength . You can also press
menu
and then turn the Control
knob to scroll to and highlight
Signal
Indicator .
Press the
Select button
.
The Satellite and Terrestrial bars
show the strength of the signal being
received . If the signal reception is
good, press and hold
menu
to return
to the main display screen .
7
Ensure Xpress
RC
i
is tuned to channel
1 . Upon power up, Xpress
RC
i
should tune to channel 1 by default, when it’s
not yet activated . If it’s not on channel 1, refer to “Listening to Satellite
Radio” on page 59 to learn about how to tune a channel .
8
If you haven’t done so, turn on your vehicle’s stereo system . Set it to
play input from the cassette source .
9
You should hear XM channel 1 through your vehicle’s stereo system .
You are now ready to activate your Xpress
RC
i
.
10
The audio level output of the Xpress
RC
i
can be increased or decreased
as necessary to match the audio levels of other sources in your vehicle .
Refer to “Set Audio Level” on page 94 .
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle’s stereo system is set to the correct source, i .e ., cassette source
(step 8) . Also be sure that the audio level is set high enough to be heard (step 10) .
Refer to “Troubleshooting” on page 107 for additional help .
Signal Indicator
SATELLITE
TERRESTRIAL
Vehicle Installation
Содержание Xpress RCi
