XM Controls Tandem-Wire, Руководство по эксплуатации

Страница: 4 / 41

2 General Safety
Arc Welding Safety Precautions
A
RC
W
ELDING
M
AY
B
E
HAZARDOUS.
P
ROTECT YOURSELF
and others from possible serious injury or death!
K
EEP CHILDREN AWAY
at all times!
P
ACEMAKER WEARERS KEEP AWAY
until such time as you have consulted your doctor.
Welding exposes you to certain hazards. However, welding is safe when
precautions are taken. The following safety information only summarizes
the more complete safety information found in the Principal Safety
Standards manuals listed at the end of this section (p. 6).
Read and follow all Safety Standards!
D
ANGEROUS
L
ASER
B
EAM
It is dangerous to look directly into the laser beam.
Ensure that suitable precautions are taken so that
direct viewing of the beam or viewing of direct
reflections from shiny surfaces is not possible.
1. A key switch is provided to allow the laser to be disabled.
2. The laser should be disabled before any maintenance is performed nearby the sensor head or
welding head.
3. The sensor head and control unit contain no serviceable parts. No work should be undertaken on
these items except by or under the direct guidance of appropriately trained personnel.
WARNING
VISIBLE LASER LIGHT
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT