XM Controls Tandem-Wire, Руководство по эксплуатации

Страница: 37 / 41

Current Pass Indicator:
During multi-pass welding the current pass is indicated as
shown opposite. The four types of pass are ROOT, HOT, FILL and CAP and the current
pass type is highlighted.
Once the number of passes for a particular layer has been calculated this will be shown in
the numbered indicator as shown opposite for a selected Fill Pass of three layers. Once a
pass has been completed it will turn grey and the next pass will be shown in red.
Message Log: During initialization and operation of the system various messages may be
generated and displayed in the message log. This is a scrolling list and will generally
indicate that the system is functioning normally, however they can also warn of problems
during initialization and of any problems that may occur during operation. Normal
message are shown in black and error messages are shown in red. The latest message is
always at the top of the list and is shown in blue.
Any initialization errors or subsequent warnings that appear in the Message Log must be
investigated before using the system to track as they indicate problems that will affect the
performance of the tracking system.