XLT Ovens 1832, Руководство по запчастям и обслуживанию

Страница: 8 / 94

Warranty – US and Canada
Rev J Approval Date: 10/16/2019
7761 W Kellogg Drive 67209-2003 - PO Box 9090 67277-0090 - Wichita, Kansas
Voice (316) 943-2751 - (888) 443-2751 - Fax (316) 943-2769
www.xltovens.com
XLT warrants Version H ovens manufactured after October 16, 2019 to be free from any defect
in material and workmanship under normal use for seven (7) years from the date of original purchase
by the end user, and further warrants main fan blades, conveyor shafts, and conveyor bearings for ten
(10) years. XLT further warrants all ovens/hoods to be free from rust for ten (10) years from the date
the equipment is originally purchased. XLT warrants Version E hoods manufactured after October 16,
2019 to be free from any defect in material and workmanship under normal use for seven (7) years
from the date of original purchase by the end user purchaser. If the purchase includes a pre-piped An-
sul system on both the ovens and hood, the warranty will be increased to ten (10) years on both pieces
of equipment. In the event of a part failure, XLT will furnish a replacement part and pay for all labor
associated with the replacement of the part. If upon inspection XLT determines that the part is not de-
fective, all incurred costs will be the responsibility of the end user purchaser. This warranty is extend-
ed to the original end user purchaser and is not transferable without prior written consent of XLT.
Damages are limited to the original purchase price.
DUTIES OF THE OWNER:

The owner must inspect the equipment and crates at time of receipt. Damage during shipment is
to be immediately reported to the carrier, XLT, and documented on the Bill of Lading

The equipment must be installed and operated in accordance with the Installation and Operation
Manual furnished with the unit

This warranty shall not excuse the owner from properly maintaining the equipment in accordance
with the Installation and Operation Manual furnished with the unit

A copy of the “Initial Start-Up Checklist” must be filled out and returned to XLT when the unit is
initially installed, and/or when the unit is removed and installed in another location

The gas, electric, and HVAC utilities must be connected to the oven and installed by locally licensed
contractors

Failure to contact XLT prior to contacting a repair company for warranty work voids any and all
warranties
WHAT IS NOT COVERED:

Freight damage

Overtime charges

Any part that becomes defective because of utility services (power surges, high or low voltages,
high or low gas pressure or volume, contaminated fuel, or improper utility connections)

Any part that becomes defective because of moisture and/or other contaminants

Conveyor belts

Filters

Exhaust Fans

Light Bulbs

Painted or Powder Coated surfaces

Normal maintenance or adjustments

This warranty shall not apply if the equipment or any part is damaged as a result of accident, casu-
alty, alteration, misuse, abuse, improper cleaning, improper installation, improper operation, natu-
ral disasters, or man-made disasters
CLAIMS HANDLED AS FOLLOWS:

Should any such defect be discovered, XLT must be notified. Upon notification, XLT will arrange for
necessary repairs to be made by an authorized service agent. Denial of services upon the arrival of
an authorized service agent will release XLT of any and all warranty obligations.