page 7 of 8
XJTAG-3030-Guide-20C-01
www.xjtag.com
SPEA 3030 XJLink2 Carrier Board
.
User Guide
8. XJLink2-3030 Module Self-Test Configuration
The relays used to isolate the UUT from the XJLink2-3030 modules also provide a built-in loopback
between the module pins when the Carrier Board is in its default state, i.e. not actively running tests.
This allows a self-test to be run on the XJLink2-3030 modules.
Running the self-test on an XJLink2-3030 module in the Carrier Board will automatically include loopback
testing. The self-test can be launched from within the XJLink Manager or programmatically using the
supplied XJIntegration DLL.
When running from the XJLink Manager, with the XJLink selected, simply click the “
Test…
” button to
launch the XJLink test dialog.
