Xitrix TravelPro SR-200 Series Скачать руководство пользователя

Страница: 29 / 77

Using the Notebook Computer

Adjusting the LCD Screen Display

The LCD screen display can be adjusted by the following key
combinations.

KEYS

FUNCTIONS

Fn + F7      Increases the brightness level.
Fn + F8      Decreases the brightness level.
Fn + F4      Changes Display Mode: LCD-only, CRT-only and LCD&CRT.

LCD Care

LCD screens are delicate devices that need careful handling.
Please pay attention to the following precautions:

•

When you are not using the computer, keep the LCD screen
closed to protect it from dust.

•

If you need to clean your LCD screen, use a soft tissue to
gently wipe the LCD surface.

•

Do not put your fingers or sharp objects directly on the surface
and never spray cleaner directly onto the display.

•

Do not press on, or store any objects on the cover when it is
closed. Doing so may cause the LCD to break.

External CRT Display

You can hook up an external monitor through the 15-pin CRT
connector. Three configurations are available:

•

LCD only

•

CRT only

•

Simultaneous display of the LCD screen and CRT monitor

You can switch between these display configurations by pressing
the key combination

[Fn]

[F4]

Содержание TravelPro SR-200 Series














































































Результаты поиска

Содержание TravelPro SR-200 Series

Отзывы:

Похожие инструкции для TravelPro SR-200 Series

Бренды по названию

Популярные бренды

Xitrix TravelPro SR-200 Series, Инструкция по установке и устранению неисправностей

Результаты поиска

Содержание TravelPro SR-200 Series

Отзывы:

Похожие инструкции для TravelPro SR-200 Series

Бренды по названию

Популярные бренды