8. Manually set the zooming position
-13-
24
28
35
50
70
85
105
Application of ZOOM to set the
zooming position
State of <output
level indicator>
zooming
<mm>
By pressing ZOOM ,you can set the zooming position, zoom will
chang green light when focus adjust status.
Pressing < >and < >.the covered focus lenght of the
flash will switch of (24/28/35/50/70/85mm).In setting the flash
zooming position.the indicator in the operational panel
will indicate the currentposition.The focus length showed by the
displayed position can be found in the table below.
represents<ON> state of indicator’s light,while
represents<OFF>state.
