XR520H Quick Installation Guide
11) Configure the Access Point
Click
Express Setup.
The Access Point will automatically contact Xirrus and obtain its license key, based on its
serial number and MAC address. This auto-licensing function requires the Access Point to
have an Internet connection. A license is needed to enable the full functionality of the Access
Point.
In the
Admin Settings
section, change both the default admin username and password to
improve Access Point security. Enter
New Admin User
and
New Admin Password
, then
Confirm Admin Password
. Leave
New Admin Privilege Level
at
read/write
. Click
Apply
Admin Settings
when done.
Be sure to record the new account name and password, because the default admin user
will be deleted!
If you make changes to the
SSID Settings
section, click the associated
Apply
button to
apply your changes.
Click
Save Changes to Flash
on the upper right to save your settings.
- 9 -
