XIRO Xplorer, Руководство пользователя

Страница: 7 / 13

Guideline
Range Extender
Front Flight Indicators
RED indicates the front of the Xplorer.
The Nose
Landing Gear
Push all landing gears to
vertical position when
flying with a Gimbal.
Vertical Position
Horizontal
Position
Rear Flight Indicators
Propeller
Motor
PC Port
Connect to PC via
Micro USB cable.
Xplorer Power Buttons and Indications: Xplorer Power Buttons and Indications:
Press and hold until the light turns ON
Press and hold until the light turns OFF
The Xplorer is using the GPS to determine its location
The Xplorer has located itself with the GPS
The battery is not securely locked into position
Power ON:
Power OFF:
Blinking:
Solid Light:
Fast Blinking:
Silver
Black
Black
Silver
marks
Assembling Your Xplorer
Understanding the Xplorer and its features and functions is
also of great importance for enjoying successful flights with
your drone.
ASSEMBLING THE XPLORER
• Note: it is suggested that inexperienced users install the
Xplorer propeller guards (if applicable) until they become
more familiar with the drone and its flight characteristics.
These guards will reduce the likelihood of propeller damage
due to less-than-ideal landings, etc. The propeller guards are
offered separately and may be purchased from wherever the
Xplorer was purchased.
PROPELLERS
• The propellers are located in the packaged marked
“Propellers/Tools/Spare Parts”.
• It should be noted that the propellers are marked according
to the brushless motor for which they are intended to be
used. The propellers with the silver hub are meant to be
attached to the corresponding brushless motor (which is
also marked with silver). To further prevent any confusion
or improper installation, the diameter of the silver hub and
black hub are slightly different. This will prevent inadvertently
attaching the incorrect propeller to a mismatched brushless
motor.
• Simply put, silver to silver and black to black.
• Additionally, the propellers are self-tightening. When
attaching them to the appropriate motor, please ensure that
they are firmly tightened. However, it is not necessary (nor
recommended) to over-tighten the propellers.
Attaching the Propellers
• As previously noted,
it is imperative to
place the correct
propeller on the
correct motor. There
are two iterations of
the propellers and
two iterations of the
motors. Please match
them accordingly.
• Place the propeller on the motor shaft, grasp the motor
firmly, and turn in the proper direction as indicated on the top
of the propeller.
Removing the Propellers
• Removing the Xplorer propellers is very simple and quick.
Grasp the motor and spin the propeller in the direction
as indicated on the top of the propeller. Ensure that you
are spinning the propeller in the unlock direction and not
tightening it further.
Important Notes:
• Use only the propellers manufactured by Xiro that are
designated for use with the Xplorer.
• DO NOT use broken or otherwise damaged propellers.
• Always use extreme care when attaching or removing
propellers.
• Ensure that the Xplorer is away from all person and objects
when preparing for flight and during the flight itself.
• It is a good practice to not install the flight battery until
the propellers, gimbal, etc. have all been installed.
7