Xinje DS2-20P7-AS, Руководство пользователя

Страница: 10 / 50

8
50°C.
Installation Near a
Heating Unit
Minimize heat radiated from the heating unit as well as any
temperature rise caused by natural convection so the
temperature around the servo drivers does not exceed 50°C.
Installation Near a
Source of Vibration
Install a vibration isolator beneath the servo driver to avoid
subjecting it to vibration.
Installation at a Site
Exposed to
Corrosive Gas
Corrosive gas does not have an immediate effect on the
servo drivers, but will eventually cause electronic components
and terminals to malfunction. Take appropriate action to avoid
corrosive gas.
Other Situations Do not install the servo driver in hot and humid locations or
locations subject to excessive dust or iron powder in the air.
(3) Installation direction
Install the servo driver perpendicular to the wall as
shown in the figure. The servo driver must be
oriented this way because it is designed to be cooled
by natural convection or by a cooling fan.
Wall
Ventilation