XiNCOM X16-R, Руководство пользователя

Страница: 70 / 82

Page 66
Data – System Status
WAN Interface
•
Connection Type – The type of connection used – DHCP, Fixed IP, PPPoE
or PPTP.
•
Connection Status – Either "Connected" or "Disconnected”.
•
"Force Renew" button– Only available if using a dynamic IP address
(DHCP). Clicking this button will perform a DHCP "Renew" transaction with
the ISP's DHCP server. This will extend the period for which the current
WAN IP address is allocated to you.
•
Connect/Disconnect – Used for dial-up/connection of PPPoE or PPTP.
•
IP Address – The IP address of the MULTI-WAN GATEWAY, as seen from
the Internet. This IP Address is allocated by the ISP (Internet Service
Provider).
•
Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
•
Domain Name IP Address – The address of the current DNS (Domain
Name Server)
•
Gateway – The address of the MULTI-WAN GATEWAY gateway.
•
MAC Address – The MAC (physical) address of the MULTI-WAN
GATEWAY, as seen from the Internet.
LAN Interface
•
IP Address – The LAN IP Address of the MULTI-WAN GATEWAY.
•
Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
•
MAC Address – The MAC (physical) address of the MULTI-WAN
GATEWAY, as seen from the local LAN.
•
DHCP Server – The status of the DHCP Server function - either "Enabled"
or "Disabled".
Device
Information
•
Hardware ID – The manufacturers ID for this particular device.
•
Firmware Version – Version of the Firmware currently installed.
•
NAT – Status of the NAT feature – either “Enable” or “Disable”.
•
Load Balance – Status of the Load Balance feature – either “Enable” or
“Disable”.
•
Virtual Server – Status of the Virtual Server feature – either "Enabled" or
"Disabled".
•
Special Applications – Status of the Special Applications feature – either
"Enabled" or "Disabled".
•
Multi DMZ – Status of the Multi DMZ feature – either "Enabled" or
"Disabled".
•
Block URL – Status of the Block URL feature – either “Enable” or “Disable”.