XiNCOM Corp.
Advanced PPPoE
The screen is required in order to use multiple PPPoE sessions on the same WAN port.
It can also be used to manually connect or disconnect a PPPoE session.
Figure 11: Advanced PPPoE
Settings – Advanced PPPoE
WAN Port
PPPoE Session
Select the desired Port and Session, then click the "Select" button. The data
for the selected Port/Session will then be displayed in the
WAN IP Account
section.
WAN IP Account
•
User Name
– Enter the PPPoE user name assigned by your ISP.
•
Password
– Enter the PPPoE password assigned by your ISP.
•
Verify Password
– Re-enter the PPPoE password assigned by your ISP.
•
IP Address
– If you have a fixed IP address, enter if here. Otherwise, this
field should be left at 0.0.0.0.
•
Host Name
– This field is used by a Host to uniquely associate an access
concentrator to a particular Host request.
Action
Use the "Connect" and "Disconnect" buttons to establish or terminate a
connection on this session, if required.
Connection
Status
This displays the current connection status for each session.
Page 25
