xiQ e2v series quick start guide rev.20120416 ©XIMEA 2012
Mounting
bracket
model “T”
Contacts
Troubleshooting
XIMEA GmbH.
Hansestraße 81
48165 Münster, Germany
Tel: +49 (251) 590 686 0
Fax: +49 (251) 590 686 99
XIMEA Corp.
2102 Beech Court
Golden, CO 80401 USA
Tel: +1 (303) 389 9838
Fax: +1 (303) 202 6350
XIMEA s.r.o.
Lesna 52
90033 Marianka, Slovakia
Tel: +421 (2) 205 104 26
Fax: +421 (2) 205 104 27
Mounting bracket is being supplied pre-assembled with the camera
body. It is easily removable if needed by removing four M2 screws
located on the bottom side of the mounting bracket.
Known issues:
S/N 132xxxxx, firmware C0.04-F1.30, API 3.2.9
#491 - Cold boot and restart with FL1009 host controller.
Camera connected during cold boot or PC restart
may not operate properly. Unplug and replug it
again to workaround.
#492 - One port of Fresco Logic
FL1009 is less reliable.
Please use the port closer
to angled end of bracket.
x
