xiQ e2v series quick start guide rev.20120416 ©XIMEA 2012
LED
indicators
Digital I/O
pinout
(rear panel view)
Dimensions
Optical
xi
Q
Isolated I/O 5-24V 20mA max.
GND
INPUT
OUTPUT
STATUS 1
xiQ013MG-E2
SN: 237198173
USB 3.0 SuperSpeed
STATUS 2
Based on the USB-IF’s USB 3.0 specification.
For use with XIMEA approved connection cables only.
POWER
ximea.com
STATUS 1
by default indicates pending exposure
LED indicators
function assignment configurable
via software
USB 3.0 micro
type B connector
18mm spacing M2 locking screws
Digital I/O
opto-isolated input and output
mating connector:
Hirose P/N: SR38-4P-3P(71)
STATUS 2
by default indicates SuperSpeed link active
POWER
by default indicates camera power present
Digital Input
Opto-isolated input
low (off) level 0-5V
high (on) level 12-24V
max. input voltage 24V
Digital Output
Opto-isolated, NPN open collector,
max. load 25mA, max. open voltage 24V
GND
Common I/O ground
As supplied, xiQ camera is configured to have standard C-mount
1”x32TPI thread, back focal distance of 17.526mm There is no need to
use additional adapters with standard C-mount lenses. Given size of the
sensor requires 1/2” sensor compatible lens to avoid vignetting.
