ADPT-MX
–
technical description
7
1.4.
Power supply connector
Some adapters require power from a power source other than the computer to power the connected cameras.
A 2-pole connector (2.54mm) is used on the adapters for this purpose:
Manufacturer:
TE connectivity
Manufacturer part-#
640456-2
The counterpart can be used for a cable connection:
Manufacturer:
TE connectivity
Manufacturer part-#
3-640441-2
1.4.1.
Power cable CBL-ADPT-PWR-0M10
For the standard power supplies supplied by XIMEA (BACS30M-24-C8, BACS60M-24-C8, PSU-GSM60B12-P1J and PSU-
GSM60B24-P1J) we offer a short connection cable: CBL-ADPT-PWR-0M10
The DC-output plug (5.5 x 2.1 x 12mm) of the power supplies can be connected to this cable.
The connector on the cable is a DC power in socket female (OD5.5/ID2.1), 12 / +24 V
Figure 1-4, power cable for the xiX adapter boards: CBL-ADPT-PWR-0M10
1.5.
Upstream and downstream directions
The target or downstream port is the port closer to the target (e.g. camera)
The host or upstream port is the port closer to the processing unit (e.g. computer or xSwitch).
