ADPT-MX
–
technical description
17
3.5.
ADPT-MX-X4G2-PCIE
Enables to connect an X4G2 target (camera) directly to a 4-lane PCIe slot of the host system.
Downstream Connector (to Target Device)
MX X4G2 Flex - PCIe x4 Gen2
Upstream Connector (to Host PC)
PCIe Edge Connector x4
This adapter can be ordered as -FL and as
–
FV version.
Figure 3-5, ADPT-MX-X4G2-PCIE-FL
The connected camera can be powered either by the PCIe bus or by a power supply.
The standard is that a power supply is used to supply power to the camera. In this case, no jumper should be plugged into the
position highlighted in the following figure.
If the camera is to be powered by the PCIe bus, the jumper must be plugged in to establish a connection to the 12V pin of the
PCIe bus.
Figure 3-6, ADPT-MX-X4G2-PCIE-FL
–
power jumper position
