Xilinx Varium C1100, Руководство по установке

Страница: 4 / 26

Table 1: Varium C1100 Compute Adaptor Features (cont'd)
Adaptor Component Varium C1100
Power Management Power management with system management bus (SMBus)
voltage, current, and temperature monitoring
External Power Sources 75W PCIe slot functional with PCIe slot power only.
Provisioned with auxiliary power connector. However, the
adaptor is thermally designed to support 150W.
Configuration Options 1 Gb Quad-SPI flash memory:
Ult device configurable over USB/JTAG and Quad-
SPI configuration flash memory
UART UART access through the micro-USB connector
Minimum System Requirements
The minimum system requirements for running the Varium C1100 compute adaptor are listed in
the following table.
Table 2: Minimum System Requirements
Component Requirement
Motherboard PCI Express ® 3.0-compliant with one full-height x16 slot.
System power supply 150W via PCI Express slot connection and 8-pin PCI Express auxiliary power.
Operating system For the latest OS support, see XRT Release Notes ( UG1451 ).
System memory For deployment installations, a minimum of 16 GB plus application memory
requirements is required.
For development installations, a minimum of 64 GB of system memory is
required, but 80 GB is recommended.
Internet connection Required for downloading drivers and utilities.
Hard disk space Satisfy the minimum system requirements for your operating system.
Licensing None required for application deployment.
For details on the acceptable environmental conditions, see the Varium C1100 Compute Adaptor
Data Sheet (
DS1003 ).
Chapter 1: Introduction
UG1525 (v1.1) March 8, 2022 www.xilinx.com
Varium C1100 Compute Adaptor Installation Guide 4
Send Feedback