Xilinx ML605, Руководство по оборудованию

Страница: 6 / 40

6 www.xilinx.com ML605/SP605 Hardware Tutorial
UG669 (v3.0) March 15, 2011
Prerequisites
Prerequisites
Prerequisites required to run the basic tutorial are:
• ML605 MicroBlaze Processor Subsystem:
• Proper hardware setup and software installation, as described in UG668, Getting
Started with the Virtex-6 FPGA ML605 Embedded Kit [Ref 2]
• Familiarity with the ML605 MicroBlaze Processor Subsystem, documented in
DS668,
AXI Interface Based ML605 Embedded Kit MicroBlaze Processor Subsystem
Data Sheet [Ref 3]
• SP605 MicroBlaze Processor Subsystem:
• Proper hardware setup and software installation, as described in UG667, Getting
Started with the Spartan-6 FPGA SP605 Embedded Kit [Ref 4]
• Familiarity with the SP605 MicroBlaze Processor Subsystem, documented in
DS667,
AXI Interface Based SP605 Embedded Kit MicroBlaze Processor Subsystem Data
Sheet [Ref 5]
• Familiarity with UG683, EDK Concepts, Tools, and Techniques , Chapter 1 ( Introduction ),
Chapter 3 ( Using Xilinx Platform Studio ), and Chapter 4 ( Working with the Embedded
Platform ) [Ref 1]
• General knowledge of FPGAs, digital design concepts, and microprocessors
• Basic familiarity with the ISE Design Suite
• Basic VHDL/Verilog knowledge
System Overview
This tutorial is based on the ML605/SP605 Embedded Kit MicroBlaze Processor
Subsystem. Readers are encouraged to refer to DS668,
AXI Interface Based ML605 Embedded
Kit MicroBlaze Processor Subsystem Data Sheet [Ref 3] or DS667, AXI Interface Based SP605
Embedded Kit MicroBlaze Processor Subsystem Data Sheet [Ref 5] during the execution of this
tutorial.