ML40x Getting Started Tutorial
37
UG083 (v5.0) June 30, 2006
ML40x Demonstrations in Platform Flash
R
16. Select Menu option:
Operations
→
Generate File…
17. Under
Generate PROM File
→
Do you want to compress file?
, click
No
18. After a pause, the
PROM File Generation Succeeded
message appears.
You have now created a PROM image file and are ready to program that image into the
ML40
x
board.
Programming the PROM
For the following steps, make sure your ML40x board is powered on and a download cable
is connected from your PC to the board.
1.
Start iMPACT or
Select File
→
New
from the menu
♦
At start up, iMPACT asks for an iMPACT Project file
-
Select
Create a new project…
and enter a project name and directory
2.
Under Welcome to iMPACT, select
Configure devices using … JTAG
, then select
Automatically connect…chain
, then click
Finish
3.
Under Assign New Configuration File, click
Cancel All
4.
Double-click
xcf32p
5.
Under Assign New Configuration File, browse to your <
LAB_DIR
> directory
♦
Change Files of type: to
EXO Files (*.exo)
♦
Select
hello_files.exo
by clicking it, then click
Open
6.
Right-click the
xcf32p
icon and select
Program…
7.
Click
Programming Properties
under the Category section. The default options
should look like
:
Figure 12:
Programming Properties
UG0
8
3_17_022406