ML40x Getting Started Tutorial
17
UG083 (v5.0) June 30, 2006
ML40x Demonstrations in System ACE CF
R
3.
Make sure the connection is running at 10 or 100 Mb/s and the ML40
x
board’s link
lights are on (the lights are located in the upper left corner of the board). The link LEDs
labeled 10, 100, and 1000 indicate the link is established at that speed.
♦
You might need to force your PC to link in 10 or 100 Mb/s (duplex) mode. If so,
then:
Right-click
Local Area Connection
→
Properties
→
Configure
→
Advanced tab
→
Speed
4.
On the remote PC host, open a Web browser connection to
http://1.2.3.4:8080
, and
follow the instructions on the loaded Web page.
♦
You might need to turn off your browser's proxy (use direct Internet connection
mode) especially if you have multiple networking devices on your PC.
♦
On the remote PC host, you can ping
1.2.3.4
to confirm that the network
connection is alive.
5.
Restore your PC's network settings when finished.
