Xilinx KC705 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 90

Xilinx KC705 Скачать руководство пользователя страница 2

KC705 Evaluation Board

UG810 (v1.3) May 10, 2013

DISCLAIMER

The information disclosed to you hereunder (the “Materials”) is provided solely for the selection and use of Xilinx products. To the maximum
extent permitted by applicable law: (1) Materials are made available “AS IS” and with all faults, Xilinx hereby DISCLAIMS ALL
WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether
in contract or tort, including negligence, or under any other theory of liability) for any loss or damage of any kind or nature related to, arising
under, or in connection with, the Materials (including your use of the Materials), including for any direct, indirect, special, incidental, or
consequential loss or damage (including loss of data, profits, goodwill, or any type of loss or damage suffered as a result of any action
brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx had been advised of the possibility of the same.
Xilinx assumes no obligation to correct any errors contained in the Materials, or to advise you of any corrections or update. You may not
reproduce, modify, distribute, or publicly display the Materials without prior written consent. Certain products are subject to the terms and
conditions of the Limited Warranties which can be viewed at

http://www.xilinx.com/warranty.htm

; IP cores may be subject to warranty and

support terms contained in a license issued to you by Xilinx. Xilinx products are not designed or intended to be fail-safe or for use in any
application requiring fail-safe performance; you assume sole risk and liability for use of Xilinx products in Critical Applications:

http://www.xilinx.com/warranty.htm#critapps

© Copyright 2012–2013 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Zynq, and other designated brands included
herein are trademarks of Xilinx in the United States and other countries. PCI, PCI Express, PCIe, and PCI-X are trademarks of PCI-SIG. All
other trademarks are the property of their respective owners.

Revision History

The following table shows the revision history for this document.

Date

Version

Revision

01/23/12

1.0

Initial Xilinx release.

04/05/12

1.1

Updated links from

Table 1-1, page 8

. Revised the JTAG configuration mode USB cable

description under

FPGA Configuration, page 9

Encryption Key Backup Circuit,

and

Table 1-4, page 11

. Added links to User SMA Clock Input in

. Added link to Si570 device vendor on

Ethernet PHY Status

Figure 1-24, page 47

. Updated

Power On/Off Slide Switch SW15,

and added

Figure 1-32, page 53

. Revised

FPGA Mezzanine Card Interface,

and

Table 1-28, page 55

Table 1-29, page 60

. Added description of power

module cooling requirement to

Power Management, page 61

Control, page 64

Table 1-35, page 69

. Added references to

Documents, page 85

.

Added

Appendix E, Compliance with European Union Directives and Standards

,

Appendix D, Board Setup

Appendix E, Board Specifications

.

12/10/12

1.2

Replaced direct, inline links to external references in the body text with indirect
references to the links in a numbered list in

Appendix F, Additional Resources

. Revised

the value for

frequency jitter for the

System Clock Source, page 24

. Revised jumper

information for

SFP_RS1, page 36

in

. Revised contents and organization of

Appendix F, Additional Resources

05/10/2013

1.3

Updated

to show v 1.1 board. Updated

Table 1-1, page 8

to identify

Fansink, callouts

pointing to

Table 1-9, page 24

Source to

FPGA Connections. Updated

Programmable User Clock Source, page 25

to include I

2

C

address. Updated

Table 1-17, page 35

for naming pins 18 and 19. Added Note to

Table 1-14, page 35

. Updated

I2C Bus Switch, page 45

to show TI device instead of NXP

Semiconductor, deleted; updated

Figure 1-28, page 50

Rotary Switch, and

Figure 1-29, page 50

GPIO SMAs J13 and J14. Added Note to

Appendix C, Master UCF

. Updated

Appendix D, Board Setup

, step 1 of installation procedure. Updated

Appendix G, Regulatory and Compliance Information

to include CE PC Test reference.

«
1
2
3
4
...
»

Содержание KC705



























































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды