Xilinx Alveo U30, Руководство по установке

Страница: 9 / 20

3. Remove the bracket from the card.
4. Place the new bracket on the card and align it with the card's connectors and screw locations.
5. Replace screws 1 and 2 on the new bracket.
6. Replace screws 3 and 4 on the new bracket.
Figure 2: Screw Locations on Bracket
Installing the Card
The following procedure is a guide for the Xilinx ® Alveo™ U30 Data Center accelerator card
installation. Consult your computer documentation for additional information.
Note: For use with UL Listed Servers or ITE.
If you encounter any issues during installation, see Chapter 3: Troubleshooting .
Chapter 2: Card Installation Procedures
UG1425 (v1.1) November 2, 2020 www.xilinx.com
U30 Installation and User Guide 9
Send Feedback