An example output of this command is given below with available base partitions displayed
under the
Flashable partitions installed in system
. Only one base partition is
shown
xilinx_u250_gen3x16_base_3
.
Card [0000:65:00.0]
Card type: u250
Flash type: SPI
Flashable partition running on FPGA:
xilinx_u250_gen3x16_base_3,[ID=0x48810c9d17860ef5],[SC=4.6.6]
Flashable partitions installed in system:
xilinx_u250_gen3x16_base_3,[ID=0x48810c9d17860ef5],[SC=4.6.6]
Use the following command to list the available shell partition.
$ sudo /opt/xilinx/xrt/bin/xbmgmt partition --scan
An example output of this command is as follows with available shell partition displayed under
the
Partitions installed in system
. Only one partition is shown
xilinx_u250_gen3x16_xdma_shell_3_1
.
Card [0000:65:00.0]
Partitions running on FPGA:
xilinx_u250_gen3x16_base_3
logic-uuid:
48810c9d17860ef53e9e529e8b14ce39
interface-uuid:
695718ec21a232e45e1afcb4e558e11f
xilinx_u250_gen3x16_xdma_shell_3_1
logic-uuid:
bd5fb8abab266c3265918257b5048e88
interface-uuid:
f2f6c5e1273e78948f2c4806221462f2
Partitions installed in system:
xilinx_u250_gen3x16_xdma_shell_3_1
logic-uuid:
bd5fb8abab266c3265918257b5048e88
interface-uuid:
f2f6c5e1273e78948f2c4806221462f2
Note: A base and shell are compatible if the card plus customization and first version digit in the partition
names match.
The
card_bdf
is displayed on the first output line for either command in these examples is
0000:65:00.0
.
Using the command options from the previous example, the command for flashing the base is as
follows,
$ sudo /opt/xilinx/xrt/bin/xbmgmt flash --update --shell
xilinx_u250_gen3x16_base_3 --card 0000:65:00.0
and the command for programming the shell is as follows.
$ sudo /opt/xilinx/xrt/bin/xbmgmt partition --program --name
xilinx_u250_gen3x16_xdma_shell_3_1 --card 0000:65:00.0
Appendix D: Obtaining xbmgmt Command Options
UG1301 (v1.8) February 5, 2021
Getting Started with Alveo Accelerator Cards
48
